Overall Design Appreciation: participate in the design of natural gas treating processes and facilities required for separation, dehydration, liquid extraction, non-hydrocarbon gas removal, product contaminant removal, and water disposal (both onshore and offshore facilities). Gas Supply System: ensure that th design for gas collection: wellhead to plant inlet battery limit meets the requirements of the plant and to ensure that start-up and gas volume variations can be accommodated without the occurrence of hydrates. Process Control and Instrumentation: ensure that control and instrumentation of the process and gas collection system are compatible. Ensure plant safety with appropriate operating and fail-safe standards. Process Software Simulation: Run HYSYS so that process performance design checks can be completed. Assist Plant Superintendent in development  of solutions to operational problems. Develop understanding detailed workings of onshore processes and offshore facilities.  Initiate efforts as required to increase efficiency and improve gas and liquid product value. Provide technical support to assist in obtaining required permits and approvals from appropriate government agencies.  Provide training to plant operations personnel on environmental impact safety implications of process and chemicals, maintaining process reliability, and proper operating practices and procedures to contribute to optimum plant performance and safe operation. Participate in the continuous development of safe work practices operating produces and promote environmental stewardship through example. Support company’s global performance system process by personal involvement in activities to enhance performance in Health, Environment, Safety and Corporate Social Responsibility. By accepting this assignment, one is also agreeing to be an active participant in one, or more of the emergency response teams, eg. Fire Brigade, etc. Support company’s efforts by personally committing to actively participate in the mentoring and coaching activities designed to enhance the skills, competencies, and performance of the National employees working in your assigned area of responsibility.

Contact:

Cosine TG at 419-255-4223 or 419-283-3096 for application instructions. Be sure to mention your found the job on Hire-Engineers.com!

Responsible for the development, modification and execution of maintenance programs for all machinery and equipment  Monitors, controls, manages and audits the storage and use of spare parts, consumables and other materials necessary for onshore and offshore operations. Responsible for intervention an turnaround activities.  Responsible for planning/scheduling of daily maintenance and operations activities, interventions, and turnaround activities.  Responsible to ensure program support for computerized maintenance management system SAP PM, quality control for data entry and effectiveness of reporting system.  Accountable to ensure that planned and unplanned maintenance of all facilities is executed in a cost effective manner while maintaining and improving equipment reliability and availability.  Assists with and supervises training and safety programs.  Ensures highest safety standards are maintained by all maintenance personnel.  Conduct regular safety meetings and assist in all emergency drills and exercises as required.  Support global performance system process by personal involvement in activities to enhance performance in Health, Environment, Safety and Corporate Social Responsibility.  By accepting this assignment, one is also agreeing to be an active participant in one, or more of the Emergency Response Teams, eg. Fire Brigade, etc.  Support company efforts by personally committing to actively participate in the monitoring and coaching activities designed to enhance the skills, competencies, and performance of the National employees working in your assigned area of responsibility.

This is a 28/28 rotational assignment and includes an uplift on the base salary.

Contact:

Cosine TG at 419-255-4223 or 419-283-3096 for application instructions. Let them know you found their job on Hire-Engineers.com!

Preference will be shown to API-510/National Board and API-653 certified Inspector/Engineer. Familiarity with API 580/581 and 579. Prefer 4 year Engineering Degree or commensurate experience. Working familiarity with ASME/API construction codes.

Show experience as a Project Manager and understanding of Capital authorization procedures. Experience with tank, pipe and pressure vessel analysis with computer software such as PVElite or Codecalc. Worked with SAP systems or Inspection management systems such as PCMS or Ultrapipe. Proven ability to communicate in front of groups and facilitative skills to hold meetings.

Responsible for independently managing the inspection activities within his/her business team/natural work team by utilizing advanced technical knowledge of inspection codes, standards, applications, as well as applying applying innovative operational theories, concepts, technology and negotiation skills.

This includes working with state inspectors, assisting contractors in interpreting codes and making recommendations for action, as well as providing services for inspection, rating, alteration and documentation requirements and ensuring that equipment is inspected in accordance with established codes, standards and practices.

Contact:

Cosine TG at 419-255-4223 or 419-283-3096 for application instructions. Let them know you found their job on Hire-Engineers.com!

The Project Quality Lead will be a member of the Project Services Team, reporting to the Project Services Lead, and interfaces with the Project Quality Team located in various sites. This position is individuals familiar with Exploration and Production in the Oil & Gas Offshore facilities.

Duties:

*Coordinate the Quality Assurance process.
*Coordinate implementation of the Project Quality Plan.
*Coordinate the Technical Assurance process.
*Monitor contractor / sub-contractor implementation of their respective Quality Management Systems and Quality Plans.
*Interface with site QC personnel on a regular basis.
*Lead and carry out Audits in line with the Project Audit Plan.
*Support review & audit of Project related management activities.
*Oversee Contractor’s audit Program for internal and external audits.
*Support Project Team to remediate quality management problems.
*Verify that the facilities meet quality targets defined by the Project.
*Assist in identification of quality management related risks and mitigation measures to the integrated schedule.
*Generate and issue status reports.
*Other quality duties, as raised during the Project Execution.

Requirements:
*10 years (minimum) experience in E&P Oil & Gas Offshore facilities or Project Engineering positions, with experience in a Quality supervisory position, including offshore experience.
*A degree in a related engineering subject.
*Knowledge and understanding of industry standards, processes, working practices and inspection techniques related to FPSO fabrication.
*Certified lead Auditor or documented experience as a lead Auditor.
*Engaged in a similar role on a major offshore project.

Apply for this Job Now

• With input from customers via quotation and sales, formulates the process systems engineering design for all types of seabed processing solutions including subsea boosting, subsea water separation. subsea gas/liquid separation and boosting. subsea gas compression, raw seawater injection 
• Perform FEED studies as well as detailed engineering studies to support projects, quotations and sales support related to various subsea process systems applications. 
• Perform process engineering calculations or coordinate as necessary to develop process engineering design, and specifies subsea process system.
• Overall separation system responsibility (external pie-separation, internal and downstream condition ,if necessary) 
• Evaluate fluid properties and production profiles 
• Prepare subsea process system design basis
• Separator internals design. sizing, specification
• Process simulations (steady state and dynamic) using HYSYS or equivalent o Chemical injection requirements 
• Sand management design 
• CFD analysis 
• Define requirements for separation testing (if necessary) 
• Inlet / outlet piping layout and equipment sizing from process perspective (effect on separation, flow regime, velocities, pressure drop, erosion, etc.) 
• Subsea seawater cooler/heat exchanger process design specification for gas compression applications 
• Define thermal insulation requirements for all subsea process system components 
• Develop subsea process system operating guidelines 
• Takes initiative to fully engage and “challenge” the product group and project team to ensure that pump system design is operable, safe and cost effective over the lifecycle of the field. 
• Develop specifications of process related equipment to be procured from outside such as level measurement sensors, separation vessel. etc. 
• Preparation of technical bid tables 
• Vendor follow-up and suppliers documents comment — technical coordination meetings 
• Lead or co-author external papers related to process design of subsea process systems for relevant conferences 
• Prepares technical reports. PFDs. P&lDs, product data sheets for overall subsea process system including definition of instruments, location, selection of all process and control equipment. interface with other product group and project team members and work in a team environment.

Required Skills:ENTRY QUALIFICATIONS:

• Good Communication skills (written, verbal and presentation) •Microsoft office (powerpoint, Excel, Word, Outlook Access is plus) 
• Experience in using process simulators such as PVTSim, HYSYS are required. Familiarity with PIPESIM. OLGA or equivalent are a plus. 
• Promotes approved FMC/CDS process system solutions within sales presentations, FEEDs and projects.

Apply for this job Now!

$5 billion dollar company is currently looking for a chemical engineer to work in a combined Process Engineering/Technical Services role at their Texas refinery in Tyler, Texas.

They will relocate the right candidate and they offer a full benefits package including medical, dental, 401K with match, and a bonus program.

Position Description: Provide Process Engineering assistance in support of Refinery goals/objectives. Position will include monitoring and troubleshooting the refining processes. Responsibilities will also include process design, project development, and economics and planning. Experience preferred in FCCU, Delayed Coking, CCR Platforming, High Severity Hydrotreating, and sulfur handling. Must be able to develop and/or maintain heat and material balances around process units and be experienced using Process Simulators and Distributed Control Systems. Operations or Supervisory experience is a plus. Other areas of interest include budgeting, LP development and operation, short/long term yield estimation, crude and product price forecasting, variable expense tracking, backcasting, and yield accounting support.

Requirements: B.S. Chemical or Mechanical Engineering degree required Demonstrated ability to independently champion ideas with peers, hourly staff, and management Excellent communication skills Excellent trouble-shooting skills Team player who is self-starter Experience in Cost/Benefit Analysis preferred Process and/or Production Engineering Experience in Refinery or large Petrochemical operating environment preferred Experience with Computer software including Microsoft Office applications Experience with Computer Modeling Software (i.e. Aspen,Hysis) is a plus

Required Skills:

BSCE and and 5+ years of exp

Company/Client Profile:

Leading Oil and Gas company

Apply for this job Now!

This position requires a Bachelor’s degree and a minimum of ten years related experience.

General Job Description :

• Modeling and analysis of radiation effects in electronics. • Technology computer aided-design (TCAD) tool development and application. • Use of electronic design automation (EDA) tools for integrated-circuit design and analysis. • Maintenance of complex semiconductor-simulation tool suites. • Experience working with simulation tools in a network computing environment. • Provide interface with software vendors. • Technical documentation and reporting. • Implement defined research products and support for sponsors. • Effectively communicate in written and oral forms progress achieved on assigned responsibilities.

Company/Client Profile :

Be a part of Vanderbilt’s culture of education, research and healthcare where your hunger for learning and succeeding will be rewarded. We have great health benefits and vacation packages for all employees. Vanderbilt is a great place to work. We are proud to say that Vanderbilt consistently ranks in the “Top 100 Universities” in the world and in the “Top 25 Universities” in the U.S.

Application Instructions :

To apply to this position, please go to www.vanderbilt.jobs. Search using requisition JAM58516. Please visit our website at www.vanderbilt.edu. Vanderbilt University is an Equal Opportunity/Affirmative Action Employer.

Contact Name : Vanderbilt University
Contact Email : robbie [dot] mansfield [at] vanderbilt [dot] edu

Apply For This Job Now!

Experience in Pipeline and Pipeline Facilities engineering, design and construction.

General Job Description:

We are currently looking for a Project Mechanical Engineer with experience in natural gas facilities. Must have at least 5 years experience with pipeline facilities engineering. Long Term positon with medium sized engineering firm. Great Benefits. West Houston.

Application Instructions:

Email resumes to alan [at] petrotechjobs [dot] com

Contact Name: Alan Feazle
Contact Email: alan [at] petrotechjobs [dot] com

Required Skills:
Must have a minimum of a Bachelor of Science degree in Engineering, preferably with an emphasis in Petroleum Engineering. If you have your Engineering degree with emphasis and/or experience in the petroleum industry and are interested in this position in the Bakersfield, California area, then please apply for this position immediately.

General Job Description:
Project Engineering has many forms, from directing a team of individuals and keeping track of a project’s status to evaluating economic factors for future jobs. Project Engineers are responsible for overseeing the various stages of development for a variety of products and projects. It is their responsibility to make sure that the various parts are progressing and that the project works as a whole.

Project Engineers are generally involved at every level of development – from concept to production and everything in between. This often requires them to know about a broad range of subjects, from economics to materials.Engineers conduct and coordinate the planning, design, construction and alteration of electrical, mechanical, structural, gaseous and liquid systems in facilities and other structures. They also review and recommend action on engineering design development documents and construction documents to insure compliance with the specified designs and programs. The variety of tasks and greater level of responsibility require organization, patience and the ability to deal with people well.

New, entry level Engineering candidate will be involved in or develop the following while under direct supervision:

1. Engineering Design Basis, Project Scoping, Project Costing, Project Tracking
2. Piping and Systems Design
3. Equipment & Instrumentation Specification & Selection
4. Equipment Fabrication Design & QA
5. Participate in Pre-Start Up Safety Reviews and Systems Startup
6. Equipment and Systems Operations & Maintenance (i.e. as-building, performance evaluations, best practices, etc.)
7. Equipment Decommission & Reuse
8. Verify materials specified meet applicable codes
9. Sizing PSV, Pressure and Flow control valves.
10. Sizing gas scrubbers & nozzle locations
11. Sizing three and two phase separators
12. Sizing Heat exchangers
13. Equipment and System Simulation
14. Material Take Off and Bill of Material Generation
15. Drawing & Sketch Red Lining

Company/Client Profile: Well known oil & gas engineering company in the Bakersfield, California area.

Application Instructions:

Send your resume as a Microsoft Word attachment to ahaulman [at] act-1 [dot] com

Contact Email: ahaulman [at] act-1 [dot] com
Contact Name: Alex