Browse > Home /

Digital Design Engineer, IP Interfaces, $50-$55/hr, Richardson, TX

August 22, 2008

Digital Design Engineer, IP Interfaces, $50-$55/hr, Richardson, TX

-4 to 6 month target contract.

Growth at this global Wireless Communications Company has led to the need for a contract Digital Design Engineer who can take responsibility for the development of requirements and high level design in the digital network interface section of the femto-cell and pico-cell system. Excellent verbal and written communication skills are required. The contract is expected to last 4 to 6 months. For immediate consideration, please send MS Word resume to resume [at] alynpatrick [dot] com

Requirements:

– BSEE required; MSEE a plus
– 10+ years experience with digital network and hardware design
– Experience with implementation of IP interfaces along with IPSEC
– Experience in gathering requirements, translating them into designs, and creating technical documentation

Written by David Herrmann · Filed Under Electrical Engineering, Engineering Jobs, Senior Level | Comments Off 

Product Engineer in Dallas, TX

August 11, 2008

Product Engineer, Salary DOE, North Dallas suburbs

Become a vital part of an engineering design team focused on research and development at this global semiconductor corporation. You will research and develop RF components for wireless and broadband markets. These high volume SMT components are designed for excellent performance and very low cost with a short time-to-market requirement. Products include directional couplers, broadband mixers, power splitters and transformers. Regular responsibilities will include verification testing; qualification testing as required; creating final drawings, test procedures, and other documentation, and releasing to document control for production, along with assisting in development of datasheets. You will utilize general RF and microwave test equipment, lab equipment, and temperature chambers. The company provides opportunities for career growth along with a generous salary dependent upon experience, and a stellar benefits package.

For immediate consideration, send MS Word resume to resume [at] alynpatrick [dot] com

Requirements:

– Experience and mechanical ability in designing test fixtures
– Minimum 4+ years of RF test experience. Excellent product engineering experience.
– Experience with engineering design CAD tools such as AutoCad, and MS Office, including Excel
– BSEE or equivalent combination of education and experience
– Strong verbal and written communication skills, including experience with technical documentation

Written by David Herrmann · Filed Under Electrical Engineering, Engineering Jobs, Junior Level, Mid Level | Comments Off 

Sr. Device Driver Software Engineer in Dallas, TX

July 29, 2008

Sr. Device Driver Software Engineer, 90-110K, North Dallas suburb

Join an established 7+ year old firm that is expanding. The company has doubled its revenue over the last 3 years! Candidate will develop leading edge Windows Device Drivers for multimedia processing electronics (this company develops board and application layer electronics not semiconductor and micro-processor electronics). Will interact with an expert team of engineers (Hardware, embedded, application, mechanical) to deliver custom solutions and advanced high volume consumer electronics. Will develop robust device drivers and expand skill base into the Linux driver and kernel world. Room for growth and ample technical challenge. Small vibrant setting where you can wear many hats!

Skills sought include:

3-5+ years of C/C++ Device Driver development. Must have some Windows DDK experience. 2+ years of Windows based driver experience (DDK or NDIS).

Experience With following a huge plus: Linux, embedded Linux, Kernel, BIOS, MPEG, Video Graphics, Win2000/XP, SDK, Win32 API, SoftIce, NuMega DriverStudio tool suite, WDM, TCP/IP, UDP/IP, network communications, decoders, encoders, video, camera processing, wireless USB, ARM based, MIPS, DVR, Set-top designs, reference boards, PCI, PCMCIA, 1394, tuners

For consideration, please email resume to resume [at] alynpatrick [dot] com

Written by David Herrmann · Filed Under $100k+ Jobs, Electrical Engineering, Engineering Jobs, Mechanical Engineering, Senior Level, Software Engineering |  

RF Design Engineer in Austin, TX

July 28, 2008

RF Design Engineer

RF Code, Inc.

As an RF Design Engineer with RF Code, you will be a member of a team developing RFID systems to solve customer needs.  In this relatively new field, opportunity for innovation will challenge your mind and satisfy your need to create.

Day to day tasks include:

  • Defining solutions to solve customer needs in asset tracking
  • Analyzing trade-offs and resolving product features
  • Low Power RF Design, 300 MHz – 2.4 GHz
  • Manufacturing support and guidance
  • Design for Compliance
  • Schematic Capture, PCB layout
  • Embedded processor implementation and design
  • Scheduling, planning and negotiation
  • Troubleshooting, bug correction
  • Documentation
  • Testing of new designs and products

Position Requirements:

The successful candidate will have excelled in previous positions with technology firms and have at least 10 years of related experience.
Candidates will have:

  • Command of Radio Frequency Communication methods and implementation
  • Understanding of manufacturing and fabrication of designed product
  • Diverse skills that center around RF communication
  • A BSEE, related armed service training, Associate Degree or aligned industry experience
  • Thorough knowledge of diagnostic and measurement tools used in engineering; Oscilloscope, meters, etc.
  • Excellent verbal and written communications skills

Required skills include:

  • RF Design, analog design, implementation, troubleshooting and documentation, ultra low power design

Additional skills are a plus:

  • Digital Design, embedded design, asm and C programming, mechanical design, passive RFID

RF Code offers a competitive compensation and benefits package, including stock options. Please send your resume to jbs [at] rfcode [dot] com.  RF Code is an equal opportunity employer.

Written by bradley · Filed Under Electrical Engineering, Engineering Jobs, Senior Level |  

Hardware/Systems Product Engineering Manager in Dallas, TX

July 14, 2008

Hardware/Systems Product Engineering Manager, Salary DOE, North Dallas Suburb

Employ your intellectual and leadership skills to help define the development strategy of this high-tech firm that is pioneering new security systems used by large organizations across several sectors. As Systems Engineering Manager, you will guide internal engineering projects in a fluid matrixes style management organization while also managing the efforts of outside vendors. These projects are often very short-lived and must result in sophisticated, working prototypes (reference designs) on the first run. You will develop system specifications, create plans and manage projects, and supervise the budget for sales support and operations development. Strong verbal, written and presentation skills and a track record of effective management across engineering disciplines will pave the way to success in this role. The company provides a generous salary and benefits package including excellent health, prescription, dental and vision coverage, paid time off, and retirement benefits. 

For immediate consideration, send MS Word resume toresume [at] alynpatrick [dot] com.

Requirements:

– Minimum requirement, 4 year degree in Engineering or related; MSEE is preferred. MBA helpful but not a requirement
– 10+ years experience as an engineer in the electronics design field. Candidate will come from a hardware design background in the digital or analog board level space. Systems design knowledge very important too.
– Must have experience leading design teams but not afraid to roll up sleeves and design a board. Not seeking someone far removed from the design itself.
– Must have experience gathering requirements’ from customers and ability to deliver effective presentations to the clients (important)
– Working knowledge of low level signal processing and electro-optic systems. Prefer some optics, sensor or RF industry experience.
– Experience with analog and digital circuits, constructing electronic circuit prototypes, and supervising electronics circuit repair
– Expertise with test equipment such as DVMs and oscilloscopes and comfortable working in a hands-on laboratory environment
– Well organized, focused, able to handle multiple priorities and projects, and with excellent communication skills.
– Knowledgeable of sensors, measurement techniques, and the modifications necessary to existing instrumentation in support of sales efforts
– Strong track record of driving engineering projects to satisfactory completion
– Ability to travel CA 20% (+/-) but not extensive

Desirable:

– Experience with PADs, ORCAD, and 3D CAD software (i.e., SolidWorks, Siemens PLM, Pro/Engineer)
– Experience with DSP and embedded systems
– C, C++ and Assembly skills
– Experience with optical ray tracing software (i.e., Optics Lab, Code V, Light Tools, OSLO and Zemax)

Written by David Herrmann · Filed Under Electrical Engineering, Engineering Jobs, Senior Level |  

« Previous Page — Next Page »